Cali-GrafCali-Graf
CompareBatteriesBackupTeslaEnphase

Backup gateways and microgrid interconnect devices compared

Cali-Graf · Published Nov 19, 2026 · Data as of Nov 19, 2026

A home battery can only run the house in an outage if something first disconnects the house from the grid; the electrical code calls that switch a microgrid interconnect device (MID). Tesla offers three for Powerwall 3: Gateway 3 and the Backup Switch, shown by Tesla for whole-home backup, and Backup Gateway 2, shown for partial-home backup; all three are rated 200 A. Enphase uses the IQ System Controller 3 family with the IQ Battery 5P, for whole-home or partial-home backup, and the IQ Meter Collar, which goes in a meter socket: under the utility meter only with the utility's authorization, otherwise in a separate meter socket; the newer IQ Battery 10C works only with the Meter Collar and the IQ Combiner 6C, never with a System Controller.

200
Continuous rating of Tesla Gateway 3, Backup Switch and Backup Gateway 2, A
Tesla Powerwall 3 Datasheet
10
AC-coupled Powerwalls in Backup Gateway 2's rating (a Powerwall 3 system: at most 4 units and 3 Expansions)
Tesla Powerwall 3 Datasheet
80
IQ System Controller 3 third-port breaker, A
Enphase TEB-00004-8.0
In this guide
The devices side by sideWhat each one doesWhat to check before choosingData limitsQuestionsMethodologySourcesHow to cite this page

The devices side by side#

DeviceModelWhere it goes, per the documentRatingBackupNotes
Tesla Gateway 31841000Service-entrance rated, 100–200 A overcurrent device200 A; 200 A panelboard, 8 spacesWhole home (Tesla example configuration)Islanding device for Powerwall 3; meters the home
Tesla Backup Switch1624171Behind the utility meter, or in a meter panel downstream of it; ANSI Type 2S socket200 A load ratingWhole home (Tesla example configuration)Contactor with manual override
Tesla Backup Gateway 21232100Service-entrance rated, 100–200 A overcurrent device200 A; optional 200 A panelboard, 6 spacesPartial home (Tesla example configuration)With Powerwall 3, the Powerwall acts as site controller; rated for up to 10 AC-coupled Powerwalls, while a Powerwall 3 system stops at 4 units and 3 Expansions
Enphase IQ System Controller 3SC200D111C240US01—Third DER port 80 A breaker (64 A continuous)Whole or partial homeMID for IQ Battery 5P systems; third port for a battery or Enphase PV
Enphase IQ System Controller 3GSC200G111C240US01—Third port 80 A (64 A continuous) for a generatorWhole or partial homeGenerator connection
Enphase IQ System Controller 3M with IQ Meter CollarSC200D111CMC1US01Meter Collar in a meter socket: under the utility meter with the utility's authorization, or in a separate meter socketAs the System Controller 3Whole home (Enphase configuration)No third-party PV inverters and no M Series microinverters
Enphase IQ Meter Collar with IQ Combiner 6CMC-200-011-V01In a meter socket: under the utility meter with the utility's authorization, or in a separate meter socket—Whole home, with or without load control; partial home unclear in the briefRequired for backup with IQ Battery 10C; no IQ System Controller; third-party solar on the load controller, shed in an outage

From the Tesla Powerwall 3 Datasheet (2025), which covers Gateway 3, Backup Switch and Backup Gateway 2, and from Enphase's planning guides TEB-00004-8.0 (July 2026, IQ System Controller 3, 3G and 3M) and TEB-00282-4.0 (February 2026, IQ Battery 10C with IQ Combiner 6C). "Backup": the layouts each maker shows in its own documents. A dash: the document does not say.

Download this table (CSV)

Design the backup layout with the battery
Cali-Graf sizes the battery for the backed-up loads and models the bill hour by hour.
Open Cali-Graf

What each one does#

- What a MID is for. Enphase's guide puts it plainly: a system needs a MID to disconnect from the grid and reconnect, so that an inverter able to run on its own does not island while still connected to the utility grid. - Tesla Gateway 3. Detects outages, switches the home to backup and meters the home for the Powerwall's modes; it carries its own 200 A panelboard. - Tesla Backup Switch. Goes behind the utility meter or in a meter panel downstream of it, in an ANSI Type 2S meter socket, and switches the whole home with a contactor that can be overridden by hand. - Tesla Backup Gateway 2. Used with Powerwall 3 in Tesla's partial-home example; with Powerwall 3 the Powerwall, not the gateway, acts as site controller. Its rating lists up to 10 AC-coupled Powerwalls, but a Powerwall 3 system stops at 4 Powerwall 3 units and 3 Expansions. - Enphase IQ System Controller 3 and 3G. The MID for IQ Battery 5P systems, in whole-home or partial-home layouts; the third port takes a battery or Enphase solar (80 A breaker, 64 A continuous), and on the 3G a generator. Up to 2 IQ Load Controllers can switch individual backed-up circuits. - Enphase IQ System Controller 3M with the IQ Meter Collar. The Meter Collar provides the MID at the meter; with it, the 3M serves whole-home layouts, but neither supports third-party solar inverters or M Series microinverters. - Enphase IQ Meter Collar with the IQ Battery 10C. A 10C system that backs up the home must have the Meter Collar; the IQ Combiner 6C's load controller handles whole-home backup with load control. For partial-home backup the 10C brief is inconsistent: its overview calls it a planned configuration not yet supported, while its section 12 shows partial-home layouts for 200 A and 400 A services; confirm with Enphase.

What to check before choosing#

- Whole home or a backup panel. Tesla's documents show Gateway 3 and the Backup Switch for whole-home backup and Backup Gateway 2 for partial-home backup; Enphase shows both layouts with the System Controller 3 and 3G, and whole-home layouts with the 10C. - The utility's approval of meter-socket devices. Enphase's 10C guide says installing the IQ Meter Collar behind the utility meter requires the utility's authorization; where the utility does not approve it, the collar goes in a separate meter socket on the home side of the service disconnect, a placement some utilities or building departments may not allow. The Tesla Backup Switch also goes behind the utility meter or in a standalone meter panel downstream of it; Tesla's datasheet does not say whether the utility must approve it. - The existing solar. With the IQ Battery 5P, Enphase supports third-party solar inverters only in grid-tied systems, without backup, and the System Controller 3M and Meter Collar do not support them. With the 10C, third-party solar such as a SolarEdge or string inverter connects to the IQ Combiner 6C's load controller and is shed in an outage for now: it neither runs the home nor charges the batteries. - The panel. Gateway 3 brings a 200 A panelboard of its own; the Backup Switch adds none.

Data limits#

The table summarizes each maker's documents as dated above; installation manuals, the local building department and the utility decide what is allowed at a given home. FranklinWH, SolarEdge and other makers' gateways are not covered here because their documents were not reviewed. Interconnection records do not show which gateway a system uses, so this page has no install counts.

What is a microgrid interconnect device?

The switch that separates a home with a battery from the grid during an outage and reconnects it afterwards; Tesla's gateways and Backup Switch and Enphase's System Controllers and Meter Collar all serve as one.

Do I need a Gateway 3 or a Backup Switch with Powerwall 3?

One of Tesla's islanding devices, Gateway 3, Backup Switch or Backup Gateway 2, for backup; Tesla shows Gateway 3 and the Backup Switch for whole-home backup.

Can the IQ Battery 10C use an IQ System Controller?

No. Enphase says the 10C and its IQ Combiner 6C do not work with any IQ System Controller; backup needs the IQ Meter Collar.

Methodology#

Each device fact was checked word for word in the Tesla Powerwall 3 Datasheet (2025) and Enphase's technical briefs TEB-00004-8.0 (July 2026) and TEB-00282-4.0 (February 2026, distributor copy); the backup layouts are those in each maker's example configurations and figures.

Sources#

  1. Tesla — Powerwall 3 Datasheet (2025). https://energylibrary.tesla.com/docs/Public/EnergyStorage/Powerwall/3/Datasheet/en-us/Powerwall-3-Datasheet.pdf
  2. Enphase — Planning the Enphase Energy System, technical brief TEB-00004-8.0 (July 2026). https://enphase.com/download/planning-enphase-energy-system-tech-brief
  3. Enphase — Enphase Energy System planning with IQ Battery 10C/10CS and IQ Combiner 6C, technical brief TEB-00282-4.0 (February 2026). https://www.invertersupply.com/media/data/teb-00282-en-us-ees-iq-bat-10c-10cs-iq-comb-6c.pdf

How to cite this page#

Cali-Graf. “Backup gateways and microgrid interconnect devices compared.” cali-graf.com, updated Nov 19, 2026. https://cali-graf.com/guides/backup-gateways-and-microgrid-interconnect-devices-compared/