Adding a battery to an existing solar system: NEM status and inverter compatibility
A battery added to an existing NEM 1.0 or NEM 2.0 solar system keeps the system on net metering for the rest of its 20-year term. The one exception is a battery installed with a Self-Generation Incentive Program (SGIP) reservation accepted on or after June 4, 2024 outside the equity budgets: that moves the home to the Net Billing Tariff. In SCE's Los Angeles County territory, 1,600 existing solar systems added a battery from January 2024 to August 2026 as NEM 1.0 or 2.0 expansions; an addition that moved a home to net billing would be recorded under that tariff instead. What decides the project is the existing inverter. AC-coupled batteries such as Tesla Powerwall and FranklinWH aPower 2 connect alongside the existing inverter, and in the records they were added to every kind of inverter. Enphase IQ Batteries are built for Enphase microinverters. The SolarEdge Home Battery is DC-coupled and works only with a SolarEdge Home Hub inverter. Powerwall 3 made up 71% of the batteries added from January to August 2026, against 8% in 2024.
In this guide
What the tariff says about the battery#
- The term stays. SCE's NEM 1.0 and NEM 2.0 schedules both say a customer who adds only energy storage remains eligible for the rest of the 20-year term. A home that adds storage through SGIP moves to the Net Billing Tariff if its reservation was accepted on or after June 4, 2024, unless it is in the Residential Solar and Storage Equity, low-income Equity Resiliency or San Joaquin Valley budget. The other rules of the term are in our guide to the legacy NEM 20-year term. - A battery behind the same meter is "NEM-paired storage". Its size is the AC nameplate rating of its inverter. For a DC-coupled battery that shares the solar inverter, the size is the lesser of the inverter's nameplate and the battery's maximum continuous output. - Small: 10 kW AC or less. There is no limit on the battery's size relative to the solar. With solar only, SCE needs no extra meter: it caps the exports it credits each month at an estimate of what the solar system can produce, scaled from a table by month and climate zone. Exports above the cap get no credit, and they are taken first from the highest-priced time-of-use period. At the start of a new yearly billing cycle the customer may instead choose the metering of a large system, at a metering cost of no more than $600 unless complex metering is needed. - Large: over 10 kW AC. The battery's total output can be no more than 150% of the solar system's maximum output: with 15 kW of solar, at most 22.5 kW of battery. That limit was waived until August 16, 2025 and applies from that date. A large system needs either the metering of a multiple-tariff facility, with the battery treated as a generator not eligible for net metering, or certified power-control equipment that keeps the battery from exporting to the grid, from charging from the grid, or both. - Grid charging. A battery directly connected to the solar system does not have to charge only from the solar and may also charge from the grid. - Costs. A battery added after the solar's permission to operate falls in the same interconnection cost categories as the solar system, and NEM-paired storage is exempt from standby charges.
Which batteries work with which inverters#
Swipe to see all columns →
| Battery | How it connects | With existing Enphase microinverters | With an existing SolarEdge or other string inverter | What to check |
|---|---|---|---|---|
| Tesla Powerwall 3 | Battery with a built-in solar inverter; existing solar is AC-coupled | Yes, AC-coupled | Yes, AC-coupled | Up to 7.68 kW AC of AC-coupled solar per Powerwall in the backup circuit; 10 kW with expansion units |
| Tesla Powerwall 2 or Powerwall+ | AC battery | Yes, AC-coupled | Yes, AC-coupled | No ratio in the Powerwall 2 datasheet; in a Powerwall 3 system, Tesla counts a Powerwall+ at 7.68 kW AC |
| Enphase IQ Battery | Part of the Enphase Energy System | Yes with IQ8, IQ7 and IQ6; of older models only M215 and M250 | Grid-tied configurations only, not grid-forming | IQ6, IQ7 and M Series: microinverter output at most 150% of the IQ Batteries' rated output off grid, or PV shedding; IQ8 not mixed with IQ6 or M Series |
| FranklinWH aPower 2 | AC-coupled battery | Yes, AC-coupled | Yes, AC-coupled | — |
| SolarEdge Home Battery | DC-coupled battery | No | Only with a SolarEdge Home Hub inverter | Up to 3 batteries per inverter |
What each maker's documents say about pairing its battery with an existing solar inverter. Tesla: Powerwall 3 System Design, AC-Coupled Solar System Sizing, and the Powerwall 2 AC datasheet; Enphase: Enphase Energy System planning guide (TEB-00004-8.0, July 2026); FranklinWH: aPower 2 datasheet; SolarEdge: Home Battery 400V datasheet (DS-000167-NAM, March 5, 2024). "Backup circuit" is the part of the home the battery powers in an outage.
- Tesla Powerwall 3 has its own solar inverter, and Tesla strongly prefers solar wired straight into it. When it is added to a home with existing solar, that solar stays on its own inverter and is AC-coupled. Tesla allows at most 7.68 kW AC of such solar per Powerwall in the backup circuit, 10 kW with expansion units, to protect the Powerwall from excess solar during an outage: a Powerwall charges at no more than 5 kW even under ideal conditions, and a Powerwall damaged by high fault current from excess solar in an outage is out of warranty. Tesla's options when there is more solar: more Powerwalls or expansion units, part of the solar outside the backup circuit if the local building department accepts it, or less solar. - Enphase IQ Batteries are fully compatible with IQ8, IQ7 and IQ6 microinverters; of the older models, only M215 and M250 work. IQ8 cannot be mixed with IQ6 or M Series microinverters on the same system. With a third-party solar inverter, Enphase supports only grid-tied configurations, not grid-forming ones. For IQ6, IQ7 and M Series microinverters with IQ Battery 5P, and for mixed IQ7 and IQ8 arrays, the microinverters' rated output may be no more than 150% of the batteries' rated output for operation off the grid, or the excess solar must be shed; IQ8 systems are limited by the system controller's port current instead. - SolarEdge Home Battery is DC-coupled and lists SolarEdge Home Hub inverters as its compatible inverters, up to 3 batteries per inverter. An existing SolarEdge inverter has to be a Home Hub model, or be replaced by one. - FranklinWH aPower 2 is an AC-coupled battery that can store solar energy or grid energy bought in lower-rate periods.
What was added to existing systems#
Swipe to see all columns →
| Existing solar inverter | Batteries added | Tesla Powerwall 3 | Tesla Powerwall 2 or Powerwall+ | Enphase IQ Battery | FranklinWH | Other or not identified |
|---|---|---|---|---|---|---|
| Enphase microinverters | 534 | 192 | 181 | 104 | 26 | 31 |
| SolarEdge inverter | 488 | 265 | 146 | 6 | 30 | 41 |
| Other string inverter (SMA, ABB, Delta, Fronius and others) | 303 | 176 | 84 | 6 | 16 | 21 |
| SunPower AC modules | 117 | 37 | 55 | 2 | 11 | 12 |
| Tesla solar inverter | 78 | 31 | 46 | 1 | 0 | 0 |
| More than one inverter type | 53 | 21 | 21 | 3 | 4 | 4 |
| Other or not listed | 27 | 18 | 8 | 1 | 0 | 0 |
Batteries added to existing residential solar systems in SCE's service territory in Los Angeles County, by the inverter on record for the solar and the battery's maker, with permission to operate from January 2024 to August 2026. "Other or not identified" includes EG4, SunPower SunVault, SolarEdge and LG batteries and records where the battery model could not be read. Source: California DG Stats, Interconnected Project Sites, data through August 31, 2026.
- Almost every expansion is a battery. 98% of the expansions of existing solar systems in this period included a battery: 557 in 2024, 518 in 2025 and 525 from January to August 2026. - Tesla dominates. 740 of the 1,600 added batteries were Powerwall 3 and 541 were Powerwall 2 or Powerwall+, on every kind of inverter: microinverters, SolarEdge and other string inverters. - Enphase batteries stay with Enphase. 104 of the 123 Enphase batteries (85%) went on Enphase microinverter systems; 12 went on SolarEdge or other string inverters. - SolarEdge batteries are rare in retrofits. Of the 488 systems with a SolarEdge inverter that added a battery, most added a Powerwall; only 8 SolarEdge batteries appear among all additions.
What it means for installers#
- Read the inverter first. The existing inverter decides which batteries can be offered and how they connect; the model is on the inverter label and in the system's interconnection records. - Count the solar against the battery. 119 of the Powerwall 3 additions to non-Tesla inverters (17%), by the solar's AC rating as recorded, which is usually below the inverter's rating, so the true share is likely higher, were on solar systems larger than 7.68 kW AC per Powerwall 3. For such a design Tesla's guide calls for more Powerwalls or expansion units, part of the solar outside the backup circuit, or another of the options it lists. - Over 10 kW is the usual case. 61% of the added batteries were recorded at more than 10 kW, the size above which the rules for large NEM-paired storage apply: the 150% limit and metering or power control. A single Powerwall 3 at 11.5 kW stays within the 150% limit only with at least 7.67 kW AC of solar. In the records, 504 of the 621 large additions with permission to operate from August 16, 2025 (81%) list a battery of more than 150% of the solar's recorded AC size; the records give the battery's rated power, not a lower output setting. A single Powerwall 3 delivers up to 11.5 kW AC; its datasheet lists output settings from 5.8 kW. - Keep the solar the same size. Adding panels with the battery can end the legacy NEM term, as set out in our guide to the legacy NEM 20-year term. - Ask about SGIP. A battery funded through SGIP outside the equity budgets moves a legacy NEM home to net billing; SGIP's ratepayer-funded budgets closed to new applications on December 30, 2025, as covered in our guide to SGIP in 2026.
Data limits#
The records describe the system after the battery was added: the inverter field lists the inverters on record, and the battery maker was read from the model text of each generator entry. The battery power is as reported in the interconnection application; the records do not show the metering or power-control option chosen, or a battery's configured output setting. The records do not show which loads are in the backup circuit. They cover SCE's territory in Los Angeles County only. Compatibility is as stated in each maker's documents on the dates above; installation manuals and the local building department have the final word. This is not legal or engineering advice.
Will adding a battery make me lose NEM 2.0?
No. SCE's tariff keeps a system that adds only storage on NEM 1.0 or 2.0 for the rest of its 20-year term, unless the battery came with an SGIP reservation accepted on or after June 4, 2024 outside the equity budgets. In SCE's Los Angeles County territory, 1,600 batteries were added to existing systems as NEM 1.0 or 2.0 expansions from January 2024 to August 2026.
Can I add a Powerwall 3 to an existing Enphase or SolarEdge system?
Yes. The existing solar stays on its own inverter and is AC-coupled to the Powerwall 3, with at most 7.68 kW AC of that solar per Powerwall in the backup circuit, or 10 kW with expansion units.
Can I add an Enphase battery to a SolarEdge system?
Enphase supports third-party solar inverters only in grid-tied configurations, not grid-forming ones; in the records, 12 Enphase batteries were added to SolarEdge or other string inverters.
Can I add a SolarEdge battery to my SolarEdge inverter?
Only if the inverter is a SolarEdge Home Hub model; the SolarEdge Home Battery is DC-coupled and lists only Home Hub inverters as compatible.
Methodology#
The tariff rules are those of SCE Schedule NEM-ST, Special Conditions 1 (definitions of NEM-paired storage) and 6 (sizing, metering and the estimation methodology), and the storage provisions of Schedules NEM and NEM-ST, in SCE's tariff book as of October 1, 2026; each sentence used was checked word for word. Compatibility is from the makers' documents listed under the table. The records are California DG Stats' Interconnected Project Sites (data through August 31, 2026): SCE, Los Angeles County, residential, with solar, interconnection program marked as an expansion of an existing system, with storage above 0 kWh, permission to operate from January 1, 2024 to August 31, 2026. The inverter type comes from the inverter manufacturer and model; the battery maker from the generator models (for example, Tesla model 1707000 is Powerwall 3). Shares are rounded half up.
Sources#
- Southern California Edison — Schedule NEM-ST, Net Energy Metering Successor Tariff, Special Conditions 1, 6 and 8. https://www.sce.com/regulatory/regulatory-information/tariff-books/rates-pricing-choices
- Southern California Edison — Schedule NEM, Net Energy Metering. https://www.sce.com/regulatory/regulatory-information/tariff-books/rates-pricing-choices
- Tesla — Powerwall 3 System Design: AC-Coupled Solar System Sizing. https://energylibrary.tesla.com/docs/Public/EnergyStorage/Powerwall/3/SystemDesign/en-us/GUID-23D242D1-8D65-47B9-9118-57002FFD84D2.html
- Tesla — Powerwall 3 Datasheet. https://energylibrary.tesla.com/docs/Public/EnergyStorage/Powerwall/3/Datasheet/en-us/Powerwall-3-Datasheet.pdf
- Tesla — Powerwall 2 Datasheet (North America). https://energylibrary.tesla.com/docs/Public/EnergyStorage/Powerwall/2/Datasheet/en-us/Powerwall-2-Datasheet.pdf
- Enphase — Planning the Enphase Energy System, technical brief TEB-00004-8.0 (July 2026). https://enphase.com/download/planning-enphase-energy-system-tech-brief
- SolarEdge — SolarEdge Home Battery 400V for North America, datasheet DS-000167-NAM (March 5, 2024).
- FranklinWH — aPower 2 Datasheet. https://www.franklinwh.com/document/apower-2-datasheet
- California Distributed Generation Statistics — Interconnected Project Sites data set. https://www.californiadgstats.ca.gov/downloads/
How to cite this page#
Cali-Graf. “Adding a battery to an existing solar system: NEM status and inverter compatibility.” cali-graf.com, updated Nov 18, 2026. https://cali-graf.com/guides/adding-a-battery-to-an-existing-solar-system-nem/